Accessories for computed tomography (CT)

RTG

Accessories for computed tomography (CT)

Modern computed tomography is not just a scanner – it also includes accessories that reduce measurement time, increase the repeatability of sample settings, and enable in-situ testing (under the influence of temperature, power supply, pressure, or during a technological process). Below we present three groups of accessories that extend the capabilities of CT systems in R&D and quality control.

1) In-situ BOX chambers for testing under real conditions (temperature/power supply)

Key benefits

Simulation of real working conditions of the sample during CT scanning – without removing it from the system.
Testing the effect of temperature on the sample (climate/temperature control).
Ability to power the sample during scanning, including battery cycling scenarios.
Modularity and customisation – interchangeable sample holders for different applications.
Quick and convenient installation (easy integration with the measurement procedure).

Key features

Temperature range (depending on version): -30°C to 60°C (standard), ‘Maximum size’ version -20°C to 60°C.
Temperature accuracy: ±1°C (thermometer accuracy: ±1°C).
Versions with different sample space dimensions (including Ø25×35 and up to Ø133×190).
Version for battery testing (In-situ Battery BOX): supports 18650 / 21700 formats, max. current 8 A, ramp-up approx. 8 min (min→max), weight approx. 4 kg.

Applications: batteries and electronics, temperature-sensitive materials, comparative tests of structural behaviour under different environmental conditions.

2) In-situ Soldering BOX – analiza jakości połączeń lutowanych podczas procesu

In-situ Soldering BOX służy do analizy połączeń lutowanych w radiografii rentgenowskiej – odtwarza proces lutowania podczas testowania, co ułatwia ocenę jakości połączeń i zachowania materiałów w czasie rzeczywistym.

Key benefits

Simulation of the soldering process during X-ray analysis – observation of changes in the joint ‘live’.
Precise temperature and pressure control – process conditions under control, easier interpretation of defect causes.
Fast ramp-up time – shorter test cycles and higher test throughput.

Key features

Maximum temperature: up to 400°C.
Programmable heating profile: yes.
Temperature change rate: ≤ 2°C/s.
Pressure range (relative): -65 kPa to +230 kPa.
Sample area: 90×90 mm, Field of View: 150×150 mm, device dimensions: 160×160×60 mm.
Heating element / substrate: AlN substrate.

Applications: electronics and automotive (connectors), soldering process R&D, defect analysis (pores, discontinuities, changes in wetting), selection of soldering profiles.

3) SaguaroX – motorised XY translation table for fast and precise sample positioning in CT

SaguaroX is a motorised XY translation table for remote, precise sample positioning during CT measurements. It facilitates centring, repeatable settings and reduces measurement preparation time.

Key benefits

Dual-axis XY translation – convenient positioning without manual intervention.
Movement precision up to 10 µm + coordinate-based positioning (easy to return to the same points).
Remote operation and quick sample setup – less ‘trial and error’ with settings, fewer repeat scans.
Wireless design + mounting allowing operation in a CT system with 360° rotation.
Compatibility with a wide range of CT systems.

The manufacturer indicates potential organisational savings: ~30 minutes per day and an estimated return on investment of ~6 months (depending on the method of operation).

Models and parameters

SaguaroX S: sample area 135×135 mm, range of motion 50×50 mm, load capacity 7 kg, weight approx. 2.6 kg, continuous operation approx. 8 hours.
SaguaroX M: sample area 220×220 mm, movement range 100×100 mm, load capacity 15 kg, weight approx. 9 kg, continuous operation approx. 16 hours.
SaguaroX M Heavy: load capacity 30 kg, weight approx. 13.5 kg.
Communication: Bluetooth Low Energy; power supply: Li-ion (various capacities depending on version) + 24 V / 2.5 A / 60 W power supply; IP20 protection rating.

Applications (examples): CT laboratories with a large number of samples, measurements requiring precise centring, comparative studies and repeatable scanning sequences.

Selecting accessories for your CT system

We will help you select accessories based on:

CT chamber dimensions and measurement geometry,
required temperature/power/pressure range,
sample weight and required XY travel range,
compatibility with a specific CT model.